Quick Links

What are Nitrates Anyway?

posted by Horse Owner Today    |   September 6, 2013 15:21

It may be hard to believe with the current warm temperatures but the first fall frost is lingering. After a first frost, there are concerns about nitrates in forage and other livestock feeds. So what are nitrates anyway, where do they come from and why can they be a concern in a feeding program?
Plant roots take up nitrogen from the soil in the form of nitrate (NO3). The nitrate is transported into the leaves where it is converted into protein. Immature plants usually contain more nitrate as they are still growing rapidly. Annual forage crops like oats and millet also normally contain more nitrates compared to perennial forages. Alfalfas, vetches, trefoils, peas and clovers generally do not accumulate nitrates. Under normal growing conditions, nitrates are continuously taken up and converted to protein to fuel plant growth and seed production.
Nitrates can accumulate in a plant following a sudden interruption of growth such as after a frost. The root system is often not affected by a fall frost and continues taking up nutrients from the soil which includes nitrates. As nitrates are being pumped into the plant, the aboveground tissue is not able to process those nutrients and hence nitrates can start to accumulate in stems and leaves. The highest accumulation typically occurs two to three days following a frost. Nitrates will decrease 10 to 14 days after the injury if the plant was not killed and is able to resume growth. If a plant is killed during a frost, the nitrates have no place to go and will remain in the plant tissue. To conserve forage quality it is best to harvest the forage crop within one day of damage. Forage should be tested to know how much nitrates it contains and to be able to adjust the feeding plan accordingly.
The nitrates themselves are not toxic to livestock. However, in ruminants such as cattle, sheep and goats, the rumen bacteria convert nitrate to nitrite (NO2). Nitrite is then converted to ammonia. Nitrate poisoning occurs when the conversion of nitrate to nitrite exceeds the animals’ capacity to convert nitrite to ammonia. Nitrite causes toxicity by reducing the capability of blood to carry oxygen which leads to internal suffocation of the animal. Sub-lethal doses may result in loss of appetite, reduced milk production, slow growth, and abortion.
For more information please contact me at the Watrous Ministry of Agriculture office 306 946-3219, call the Agriculture Knowledge Centre at 1-866-457-2377 or visit our website http://www.agriculture.gov.sk.ca/.
by Nadia Mori
Regional Forage Specialist
(306) 946-3219

Tags: , , ,


What is this?

posted by Horse Owner Today    |   September 3, 2013 11:39


Can you identify this plant?  Do horses eat it?

Plant sample cut in hayfield

Plant samples in garden, yard and hayfield

Photo credit:  HorseOwnerToday.com




Tags: , , , , , ,


Giving Your Alfalfa Stand the Winterizing Treatment

posted by Horse Owner Today    |   August 23, 2013 16:21

Alfalfa field March 21, 2014

Photo credit:  Bonnie Newton

Alfalfa field, one month after first cut.

If not properly managed, alfalfa can suffer winter injury or winterkill. Several factors play into good winter survival of your alfalfa stand.
Taking a Second Cut
For alfalfa, early fall is a critical time as plants are storing nutrients needed to survive the upcoming winter. Cutting plants during this period adds double the stress to the plants as they have to expend energy for regrowth as well as nutrient storage. During a minimum of six weeks after cutting, alfalfa plants need good growing conditions to ensure sufficient regrowth and energy storage to support winter survival. Plants harvested after August 15th may not have six weeks before a killing frost and may be susceptible to winter kill. A killing frost is considered minus five degrees Celsius or lower. Harvesting after a killing frost does
not affect food reserves but reduces the amount of stubble which helps trap snow. The trapped snow provides an important insulating blanked for alfalfa crowns.
If alfalfa makes up 50% or more of the production in the stand and was properly inoculated at seeding, nitrogen is generally not a concern in the forage stand as the alfalfa will fix the nitrogen required by the stand. Phosphorus, potassium and sulphur are the three nutrients which should be considered in stands with large proportions of legumes. Phosphorus and potassium are particularly important as they support root and nodule health and over-wintering capability. Both of these nutrients can be fall applied as they are relatively immobile in the soil and will not leach or volatilize to the atmosphere like nitrogen. The most cost-effective way to maintain adequate soil fertility is to do a fall soil test.
Stand Health
An otherwise healthy stand can be impaired by insects and disease such as alfalfa weevils and downy mildew. Scouting for insects during June is important in noticing and minimizing insect feeding damage while disease resistant alfalfa varieties are your best defense against various root and leaf diseases.
Environmental Factors
Not all factors in alfalfa fall management are under your control. For example, wet soil conditions in the fall can reduce the plants ability to harden prior to winter. Lack of snow cover is also a concern as alfalfa crowns can be exposed to extreme cold. Snow cover can be improved by leaving sufficient stubble height.
Planting cold tolerant and disease resistant varieties along with a good fertility program and careful cutting management will help winterize your alfalfa stand for better longevity and productivity.
For more information on this or other topics please call me at the Watrous Ministry of Agriculture office (306) 946-3219, the Agriculture Knowledge Centre at 1-866-457-2377 or visit our website http://www.agriculture.gov.sk.ca/

Tags: , , ,

Fall Feed Management

Know Your Nitrate Risk

posted by Horse Owner Today    |   September 14, 2012 12:19

Chelsey Carruthers, M.Sc., AAg
Regional Livestock Specialist, Saskatchewan Ministry of Agriculture

Every fall with the first frost looming, livestock producers worry about nitrate in their forages. What is nitrate, where does it come from and what can you do about it?

What is nitrate?

During normal growth, plant roots take up nitrogen from the soil in the form of nitrate and the plant converts it to protein. When plant growth is stopped by an event such as hail, frost, drought or chemical damage, this normal process is affected and nitrate accumulates in the plant.

When ruminant animals eat plants containing nitrate, their rumen microbes convert it to nitrite, which is much more toxic. At low levels, nitrite is handled by the rumen microbes and used for protein production. However, at high levels, the microbes can’t keep up. Nitrite is absorbed into the blood stream where it can cause problems by decreasing the oxygen carrying capacity of the blood. Animals can die due to lack of oxygen. Symptoms of nitrate poisoning include trouble breathing, weakness, diarrhea, muscle tremors and death. At lower levels, nitrate poisoning can cause decreased productivity and abortions.

How can you tell?

Nitrate accumulates in the stems and leaves of plants following periods of stress. However, not all plants are equally affected. Nitrate tends to accumulate in annual forages, such as those used for swath grazing and green feed, and some weeds, and is usually higher in immature plants. Legumes such as alfalfa rarely accumulate high levels of nitrate. Crops that have been fertilized with nitrogen will be at higher risk of nitrate accumulation.

After a stress that kills the plant, such as a hard frost, the crop should be harvested as soon as possible. The plants will not recover, and cannot clear the nitrates. Because the plant roots will continue to absorb nitrate from the soil for a few days following plant death, the nitrate level in the plant will continue to rise during this period.

If the stress to the plant has been mild enough for the plant to recover and continue to grow, harvest should be delayed about ten days. This will give the plant a chance to use up the stored nitrate and convert it to protein.

If you suspect your harvested forage is high in nitrate, a feed test can be done to determine the nitrate level. This will give you an idea of what you are dealing with, and what you can do about it.

What can be done?

Not all frozen forages will be high in nitrate. Testing is the only method for determining the nitrate level and developing a plan to deal with high nitrate feed. Most of the time, the risk to livestock can be decreased by diluting high nitrate feed with low nitrate feed. Water can also be high in nitrate, and should be tested as well. A combination of feed and water both high in nitrate can be a more serious problem. Livestock should be maintained in good body condition, and provided with a diet well balanced in energy, protein, vitamins and minerals. Livestock should also be introduced to higher nitrate feeds very slowly, and monitored carefully.

Understanding the process of nitrate accumulation, the risk factors, and the importance of feed testing can help you to plan ahead and deal with high nitrate feeds to protect the health and productivity of your livestock.

For more information on this or other topics please call me at (306) 946-3237, the Agriculture Knowledge Centre at 1-866-457-2377 or visit our website: http://www.agriculture.gov.sk.ca/

Tags: , ,



posted by Horse Owner Today    |   July 27, 2012 15:14


Weather conditions this summer have been conducive to the formation of blue-green algae blooms on dugouts and ponds.  Nutrient rich runoff flowing into a body of fresh water combined with warm daytime temperatures in the summer accelerates algal growth, including that of blue-green algae.
Blue - green algae is not an algae, but a bacteria called "cyanobacteria."  This bacteria produces toxins that can cause skin and eye irritations, gastroenteritis, liver and nervous system damage, sickness and, at times, death.
A surface bloom of blue-green algae may look quite differently depending on which species is dominant. Some will have a shimmering blue-green colour.  The bloom may also have a foamy sheen-like appearance that looks like spilled paint floating on top of the water.  Heavy blooms may appear like a solid shimmering blue-green sheen across the water’s surface, may have an appearance and consistency similar to pea soup, or may have a mixture of the colors tan, purple, grey, green or blue-green.
If blue-green algae is identified in a water source, all livestock, pets, and human contact should be prevented.  The water will require treatment. 
The most common treatment of blue-green algae in an open dugout or pond is with a registered product containing copper sulphate. A treatment rate of one pound (0.45 kilogram) of copper sulphate (by weight) will treat 100,000 gallons (1 kg/1,000,000 litres).  There are two common application methods: the copper sulphate can be dissolved in warm water, which is then sprayed over the water’s surface; or, the copper sulphate can be weighted into a cloth bag with a rope spread from side to side, and with the assistance of another individual, the bag can then be dragged back and forth across the water’s surface.  When treating dugouts, the objective of the treatment is to target the top meter (1.0 m) to kill the algae.

Copper sulphate works by killing the blue-green algae.  Doing so releases the blue-green algae toxins into the water.  Therefore, it is recommended that 12 to 14 days should pass prior to any livestock, pet and/or human contact with the contaminated water.  If treating a dugout containing fish, it is recommended that only one-third of the dugout should be treated, using one-third of the recommended copper sulphate weight applied in treatments over a three day period. 

The treatment process described above applies to non-draining waterbodies, such as dugouts, which are wholly contained on private land.  In the case of waterbodies that drain to adjacent properties or waterways, a permit for the chemical control of aquatic nuisances is required from Saskatchewan Environment. 

For more information, call the Agriculture Knowledge Centre at 1-866-457-2377.

Tags: , ,



posted by Horse Owner Today    |   July 23, 2012 17:51


The 2012 growing season has been characterized by significant rainfall across the agricultural zone of Saskatchewan, following a dry, warm winter. In Saskatchewan, spring precipitation is the largest single determinant of yield of cool season forage species. With favorable soil moisture present in nearly all areas of the province, a good forage crop should be expected. Some producers have noticed that their alfalfa fields are not yielding, considering the soil moisture present. The following factors may be contributing to decreased alfalfa vigor and yield.
Alfalfa weevil
The alfalfa weevil (Hypera postica) is a pest of alfalfa crops, and is increasing in occurrence in Saskatchewan. Alfalfa weevils have been observed predominately in the southeastern and east-central parts of the province in alfalfa hay and seed fields. Adult weevils are approximately 5 mm in length, brown in colour, with a darker brown stripe from the head running down the back. The alfalfa weevil is a snout beetle, with a pronounced hook shaped proboscis at its anterior end. The larvae, when newly hatched, are yellowish green. At maturity, larvae are approximately 8 mm in length, and have a black head and a white stripe down the centre of its back. Adult weevils overwinter under plant debris and soil in and around alfalfa fields. Weevils emerge in spring and begin feeding on alfalfa leaves, creating round holes in the leaves. Females, when ready to lay eggs, chew a hole in the stem of the alfalfa plant and deposit from one to 40 eggs per stem. The bright yellow eggs can be seen with the naked eye if the stem is cut open. Eggs hatch one to two weeks after being laid, and the emerging larvae initially feed within the stem before moving to the developing buds, then newest leaves.


Alfalfa weevil larvae leaf damage.
Source: Saskatchewan Agriculture

Damage begins as pinholes and progresses to extensive feeding damage to leaf surfaces between veins, resulting in a ragged, skeletonised leaf. Heavily infested fields may not have flowers present, as the larvae will remove developing inflorescences. Often the first sign of weevil damage is the discoloration of the crop as the larvae feed. Evident from the field edge, the crop will develop a whitish sheen, or frosted appearance, due to foliar damage.


Alfalfa weevil larvae.
Source: Saskatchewan Agriculture

Larvae feeding occurs predominantly early in the season, in mid-June to mid-July. Mature larvae move down to the base of the plant or onto the soil and spin a lace-like cocoon. The adults emerge from the cocoon in one to two weeks. The larvae represent the most destructive stage of the alfalfa weevil life cycle, and most weevil damage occurs on the first cut. Usually a single generation of the weevil occurs per season in northern climates.
The most cost effective control can be cultural. Cutting when the potential for significant weevil damage becomes apparent will stop yield losses. If the infestation is severe and early cutting is not feasible, alfalfa weevils can be controlled by using insecticides as per economic thresholds indicated below.

Economic thresholds for alfalfa weevil pesticide application

Foliage: 35-50 per cent of foliage tips show feeding damage.
Larvae: 20-30 3rd/4th instar larvae per 90o sweep of insect sweep net.

30 cm crop height and one larva per stem.
40 cm crop height and two larvae per stem.
Three larvae per stem requires immediate action regardless of height of crop.
Two or more active larvae per crown (four to eight larvae per sq. ft) on regrowth after the first cut.



Tags: , ,


Lead Toxicity in Cattle

posted by Horse Owner Today    |   June 1, 2012 09:00

Dr. LeeAnn Forsythe DVM, MVetSc, Disease Surveillance Veterinarian

Lead poisoning continues to be the most predominant toxicity encountered in cattle and a cause of significant economic loss for beef and dairy producers. Currently, the primary source of lead on the prairies is discarded vehicle batteries.

Symptoms of lead poisoning in cattle include neurological signs such as depression, stumbling or difficulty walking, blindness, and seizures. The most severely affected animals die within 24 hours of initial onset of clinical signs, but some animals may die up to 2 weeks after exposure.  Not all animals exposed to the lead will develop clinical signs; some may appear to be perfectly normal even though the level of lead in their blood is high. The only way to be certain of which animals were exposed to lead is to test blood for lead.

Because lead is heavy, pieces of lead can become stuck in the cow’s stomach. These pieces slowly release lead into the cow’s body over a long period of time.  Lead is deposited in the kidneys, liver, and bone and excreted in the milk, urine and feces. The time to elimination from the body is highly variable. In some cases animals have found to have lead levels above the acceptable limit for years after the exposure.

Livestock producers need to ensure that cattle do not have access to lead by removing discarded batteries, old oil, paint, shingles and other sources of lead. Meat and milk from lead-poisoned cattle is a food safety concern; therefore, these animals should never be used for food production

Tags: , ,


Integrated Pest Management for Pastures

posted by Horse Owner Today    |   May 25, 2012 12:58

Nadia Mori, MSc, PAg, Regional Forage Specialist
Watrous Regional Services Office
Saskatchewan Ministry of Agriculture

Integrated pest management (IPM) is a well established practice in crop protection and can be a valuable approach in forage stand management. IPM means to have a well rounded weed and pest control plan which considers at all options from prevention to control methods available. The following components should be part of an IPM approach:
1.    Monitor Weeds
Monitoring is the process of regularly inspecting pastures to determine if any undesirable plants are present. Scouting also identifies conditions which could favour the development of a weed infestation. For example a recently flooded area on a slightly saline soil may start to convert to foxtail barley.
2.    Pest Identification and Biology
Correct pest identification is necessary in order to select appropriate and effective control measures. Consult with an agrologist or biologist if you are unsure about the identification of a weed or insect found in your pasture. Some basic understanding of the biology of the pest is also critical to effective control and prevention. For example, since annual weeds reproduce by seeds, control measures will be more effective if done before seeds are produced.
3.    Weed Control
Weed control measures must be evaluated in order to select the most appropriate control measures and combine control methods effectively. Herbicide application is one form of control but other alternatives like providing rest during the growing season, mowing, targeted grazing, burning, biological controls and even hand rouging should all be considered. Each control method will have associated costs and make some solutions more economical. For example, cost of weed control procedure, cost of lost production, and cost of damage to non-target plants are some costs to be considered.
4.    Evaluate Weed Control
Control measures must be evaluated to verify the degree of effectiveness. If adequate control has not been achieved, the reasons for the lack of effectiveness should be identified and corrected. Effects on non-target plants and impacts away from the target area must also be identified.
5.    Recordkeeping and Program Management
A complete and accurate set of records is basic to any pest control program. Records will assist in identifying key information such as: which pests have been a problem; where the infestations occurred; how successful different control options proofed to be; what the actual cost of the chosen control option was; during which conditions control options worked or not; which conditions allow certain pests to become a problem (for example, site disturbance, drought conditions, or overgrazing).
For more information, please contact:
    Watrous Regional Services Office (306-946-3220),
    Agriculture Knowledge Centre (1-866-457-2377) or
    Visit our website at www.agriculture.gov.sk.ca.

Tags: , ,


EcoFriendly Action Grants

posted by Horse Owner Today    |   April 23, 2012 12:25

EcoFriendly Sask is offering monthly grants of up to $500 to support local projects that will benefit the environment. We're interested in concrete, tangible actions from across the spectrum: from habitat restoration and recycling to planet-friendly urban design, gardening, wildlife and energy conservation. Additional information is available online at http://www.ecofriendlysask.ca/2012/04/ecofriendly-action-grants.html. Email questions or proposals to ecofriendlysask@gmail.com

Tags: , ,

energy | Feed | General | green | horse

Salt Cedar- Have You Seen This Shrub?

posted by Horse Owner Today    |   April 13, 2012 13:48

The Frenchman- Wood River Weed Management Area (WMA) and the Swift Current Creek Watershed Stewards (SCCWS) have recently completed a factsheet on the identification of Salt Cedar - an up and coming invasive species that has been found in Saskatchewan. Salt Cedar (tamarix spp.) has the ability to use 80- 120 gallons of water per day per plant and render the soil below the plant saline.


Tara Davidson, Ponteix area cattle producer and AESB/PFRA Range Specialist notes, “the information provided in this factsheet is easy to read and well laid out.  Producers and land managers on the ground will be able to identify out-of-place plants as Salt Cedar. Invasives are a real threat to the industry.”


This factsheet is the final phase of the project.  Salt Cedar had been recently found in South West Saskatchewan, so extensive searching for other infestations in gravel pits and local creeks occurred this fall.  Thankfully, no new Salt Cedar infestations were found.  Government and Industry partners came together in February to discuss Early Detection and Rapid Response Planning for Salt Cedar.  A large group of producers and land managers attended an informational meeting on Salt Cedar in Cadillac February 15th where a fellow cattle producer from northern Montana spoke about the risk Salt Cedar poses.


Montana ranchers Sylvan Walden and Ron Stoneberg brought a strong message. “You don’t want Salt Cedar. It can grow so thick that you can’t see cattle on the other side of the patch.  It uses a lot of water and impacts the grass and riparian areas.”


Print copies of the Salt Cedar factsheet are available by contacting the WMA or SCCWS or for download at www.sccws.com. Producers in the WMA and the SCCWS area will receive a copy in the mail shortly.


Funding for this project has been provided by the Government of Canada’s Invasive Alien Species Partnership Program delivered through Environment Canada. The Frenchman – Wood River Weed Management Area and the Swift Current Creek Watershed Stewards have worked collaboratively on this project.




For more information, contact:

Julie Mackenzie P.Ag

Administrator Frenchman-Wood River Weed Management Area

Ph: 306-264-3884


Shannon Garchinski A.Ag

AEGP/ Invasive Articling Agrologist Swift Current Creek Watershed Stewards

Ph: 306-778-5027

Tags: , ,